Saturday, July 18, 2015

A Special Wish for You on Your Birthday

Before I get started in sharing my card/tag with you.  I just wanted to let you all know that the photos are blurry because of the flowers.  I used my scanner to import these pictures.  So with that out of the way, let's get started.  The size of this card/tag is 4 1/4" x 6 1/2".


Front view of card/tag

Marianne Design - LR0157

A special wish for you on your birthday

Recollection Roses

Back pocket where you can store gift cards

Materials you will need:

Spellbinders - A2 Scalloped Borders One
Spellbinders - Decorative Labels Twenty-Two
Spellbinders - Opulent Ovals
Cuttlebug by Anna Griffin - Poppy
Marianne Design - LR0157
Tim Holtz Distressed Ink - Tea Dye
Shear Ribbon
Brown Ribbon
Recollection Roses

If you should chose to make something like this, please take your time.  It truly is worth it at the end.  Again, thank you for stopping by and sharing your Saturday with me.


Challenges I've Entered:

Craft Desert Diva - Birthday 
DL Art - Linky Party
Jo's Scrap Shack - Emboss & Distress
Ladybug - Special Birthdays
Scrap & Craft - Celebrations

Wednesday, July 15, 2015

Dancing Candles

Today I wanted to share with you two cards using one file.  This file (Dancing Candles) comes from My Scrap Chick.  There are a lot of photos so please be patient.

Each card was made as an easel card with the measurements of 4 1/4" x 5 1/2".  I inked them both, added pink chalk for the cheeks, gel white pen for the eyes, and black zig pen for the eye brows.   So lets take a look........

Both Cards




1st Card "Make A Wish"


Front cover

Inside Caption

G Studio Stamp "make a wish"
 
Close-up of the 1st candle


2nd Card "Birthday"


Front Cover

Close-up of the 2nd candle
 
Inside Caption (Forgot to stamp Happy Birthday inside before scanning into computer)

Just centered the candle around the word "Birthday"


I understand I didn't give all information on how to make the 2nd candle card.  But I thought the pictures were enough to explain how to make it.  This file was so easy to put together once I decided on the colors.  However I will mention, if you would like to use both candles on one card.  Make sure to reduce the size.  My original thought was to have them both on one card.  But after cutting them,  I realized they were to big for one card.  Oh well!!!!

As always, thanks for stopping by.  I hope you have wonderful week.


Challenges I've Entered:

Craft Desert Diva - Birthday
Creative Card Crew - Die Cuts
DL Art - Linky Party
Ladybug Crafts - Special Birthdays
My Sheri Craft - Birthday 
Silhouette Challenges - Anything Goes



Monday, July 13, 2015

Make A Wish

Needed to make a quick birthday card for our SIL.  So this is what I came up with.




The cut is from Miss Kates Cuttables.  I enlarged it to 5 1/2" so I could make a card.  I welded the very dark brown together to help make the card base.  However, where I welded it, it seemed to flimsy and would rip.  So I put a crease from the top about 3/4" down and taped it together.  Making my fold.  But before all this was done, I attached the inside copy of the title.  See photo below




I stamped "Happy Birthday" inside with Memento Tuxedo black and added Teresa Collins enamel shapes to the inside to give it some character.




For the candle I added some stickles yellow.  Once it dried it was off in the mail.  Happy Birthday Gabe!


Challenges I've Entered:

Craft Desert Diva - Birthday (Linky Party)
DL Art - Linky Party
My Sheri Craft - Birthday (child)

Saturday, July 11, 2015

Happy Memories, Happy Times, Happy Anniversary

Happy Anniversary to a Special Couple of Ours, Tim and April!!!

Before I begin to share my card with you all.  I just wanted to let you all know that the inspiration for this card all came from Gloria (spryorocks346) on YouTube.  She is an amazing and very talented lady.  Please feel free to stop by her YouTube channel and give her some love.

So now for my card.  Please note I did make some changes from Gloria's original.


Recipe:

White cardstock - 4 1/4" x 5 1/2"
Teal cardstock (Recollection - Earth) - 4" x 5 1/4"
Patterned cardstock (DCWV - All Dressed Up Stack) - 3 7/8" x 5 1/8" 
My World Cartridge (page 15 - fence) - 1 1/2" cut (2)
Foam tape for fence only

Groom:

Teddy Bear Parade Cricut Cartridge - 3"
Peachy Keen Stamps - PK754 Critter Faces
Memento Black Ink
Inkadinkado - Bold Brights blending chalks (cheeks)
Wink of Luna Zig Pen - green (eyes)
Gelly Roll Pen - white (eyes, nose and cheeks)
Glossy accents 
Rhinestone (flower)



Groom with outfit




Close up of Groom's face



Bride:

Teddy Bear Parade Cricut Cartridge - 2.75"
Peachy Keen Stamps - PK754 Critter Faces
Memento Black Ink
Inkadinkado - Bold Brights blending chalks (cheeks)
Wink of Luna Zig Pen - blue (eyes)
Gelly Roll Pen - white (eyes, nose and cheeks)
Glossy accents 
Rhinestone (flower)
The Paper Studio - Cut Ribbon Embossing Folder



Bride with wedding gown



Close up of the Bride's face


Inside the card:


I computer generated the saying and stamped an image above using Inkadinkado "Ornate Flourishes" with Momento Black Ink.  I apologize for the black line.  I covered over my note to the special couple before coping the photo on my scanner.  The measurements for the paper is as followed:

Teal cardstock (Recollection - Earth) - 4" x 5 1/4"
Patterned cardstock (DCWV - All Dressed Up Stack) - 3 3/4" x 5"
White cardstock - 3 1/2" x 4 3/4"

As always, thanks for stopping by.  Please don't forget to stop by Gloria's YouTube channel and give her some love also.  Have a wonderful weekend.

Challenges I've Entered:

Creative Card Crew - Die Cuts
DL Art - July Linky Party
Little Scrap Pieces - Linky Party
My Time To Craft - Paper Piecing
Scrap & Craft - Celebrations
Simply Papercraft - Anything Goes
Through The Craft Room - Anything Goes
Word Art Wednesday - Anything Goes/Family Friendly


Thursday, May 7, 2015

Mom Shaped Card #2

For this card I made it as an A2 card.  So I enlarged it from the original file which can be found here at www.birdscards.com




Card Recipe:

White Cardstock
Green Cardstock
Pink Cardstock
Red Cardstock
Yellow Cardstock

I used my Silhouette Cameo to cut the card base and 2 copies of the front layer in white. I glued pieces of colored cardstock behind one of the front layers then attached the other front layer to the back to make a sandwich.  I then popped the phrase onto the card base with 3d foam pads.

Below are close-up photos of the colored layer sections:






Thanks for stopping by.  And once again, Happy Mother's Day!  


Challenges I've Entered:

DL Art - May Linky Party
DoubleClick Skittles - For Mom or a Girl
Cardz TV - Mother's Day
Silhouette Challenge - Anything Goes
Jo's Scrap Shack - Happy Mother's Day
Craftin Desert Divas - Mother's Day Linky Party
Fresh Brewed - For Mom
Terrific Tuesday Challenge - All About Mom

Wednesday, May 6, 2015

Mom's Shaker Card

Today I wanted to share with you a Mom's Shaker Card by www.birdscards.com.
  



Card Recipe:

Purple Cardstock
K&Company - Floral Dreams Patterned Paper
Cream Cardstock
Papered Flowers
.007 Clear Craft Plastic Acetate
Rhinestones
Eyelets
Sequins
Old Michael's Stamp (Happy Mother's Day)
Quick Dry Adhesive Glue




In order to assemble this card, you will need to cut your card base once, then cut the solid Mom piece once in acetate, once in your chosen patterned paper, and once in plain cardstock. You will also need to cut the Mom outline once in the same cardstock as your card base then cut it several times to build your shaker walls, I cut 9 of these for my card.

Glue your front outline onto your acetate piece and set it aside to dry. Next, adhere your other outline pieces one by one on top of your patterned piece using wet glue so you have a little wiggle time.

Fill each section with different colored sequins. You could use glitter, small beads or confetti instead. The trick is not to add to much.

To seal your shaker sections, carefully add glue to the top of your shaker walls and pop your acetate panel into place.

If you would like to make one of these for your mom, please visit this link (Team KnK) where you can pick up the cutting file directly.

Happy Mother's Day to all of you!!!


Challenges I've Entered:

DL Art - Mother's Day
CardzTV - Mother's Day
Craftin Desert Divas - Mother's Day Link Up
Creative Corner - For Mom
Jo's Scrap Shack - Happy Mother's Day
Pile It On - Mother's Day/For A Lady
Scrappy Mom Stamps - All About Mom
Silhouette Challenges - Anything Goes
Shopping Our Stash - Big, Bold & Beautiful
Sweet Stamps - For Mom